• Products
  • Industries
  • Customer Support
  • About SINTO
  • Investor Relations
  • Contact Us
  • Foundry
  • Surface Treatment
  • Environment
  • Mechatronics
  • Powder Treatment
  • Test & Measure
  • Ceramics
  • Material Handling

HOME > Products > Surface Treatment > Machining processes > Cleaning

Cleaning

Our surface treatment solutions can be applied for cleaning products by peeling off unwanted materials:

Application

  • Descaling
  • Deposited film stripping
  • Deposit removal
  • Removal of impurities
  • Paint stripping
  • Phosphate coating removal
  • Plating stripping
  • Rust removal

and many more.

  • Descaling

  • Removal of impurities

  • Rust removal

  • Sand removal

Before

Whole or partial removal of various attached substances on the surface such as scale, coating film, evaporated film, etc...

Offering the best applicable blasting Treatment as to thickness of the attached substances.

Result and function

  • Removal of causes of problems from functions and subsequent processes
  • Reclamation (reuse)
  • Cleaning
  • Yield improvement
  • Rust prevention
  • Hardness measurement
  • Dimensional accuracy improvement
  • Flaw detection
  • Part mounting accuracy improvement (for easier mounting)
  • Protection from sticking matter (contaminants, etc.)

Examples of processing

Descaling of Heat Treated Parts

Before

Before

After

After

Rust removal of casting

Before

Before

After

After

Removal of impurities

Paint coating fixture

Before

Before

After

After

Sand removal of machine parts

Machine parts

Before

Before

After

After

Machines used for descaling, removal of impurities, and their features / Features of the process

Machines Features of the process
Airblasting machine (sand blasting)
  • Capable of blasting a local point by injecting shots through a nozzle.
  • Suitable shots can be selected according to the product type from a variety of options.
  • The one-piece or batch process can be selected according to the equipment type.
  • Capable of keeping parts clean.
  • Capable of blasting a product at a time using a wide blasting pattern
  • The dry process does not require cleaning.
  • Various types of molds can be cleaned and blasted by injecting shots through a nozzle. Also used for blasting after electrical discharge machining.
  • Capable of blasting inner surfaces.
Shotblasting machine
  • Capable of injecting a lot of shots and, therefore, blasting large products or a large number of products over a large area at a time, resulting in a high efficiency.
  • The one-piece or batch process can be selected according to the equipment type.
Barrel polishing machine
  • Capable of polishing a product without removing sharp edges.
  • Capable of blasting narrow slits or the inside of a product without roughening the surface.
  • The one-piece process does not cause gouging and chipping among products.
  • There is no risk of grit and shots clogging products or entangled by them.

Please consult us for surface treatment-related.

(81)52-582-9217 +81-52-581-6896

Reception hours: 9:00 to 12:00 and 13:00 to 17:00 on Monday through Friday
(excluding national and corporate holidays)

Please enter your question here.

Page Top