• Products
  • Industries
  • Customer Support
  • About SINTO
  • Investor Relations
  • Contact Us
  • Foundry
  • Surface Treatment
  • Environment
  • Mechatronics
  • Powder Treatment
  • Test & Measure
  • Ceramics
  • Material Handling

HOME > Products > Surface Treatment > Machining processes > Deburring

Deburring

Our surface treatment solutions can be applied for cleaning products by removing unwanted materials:

Application

  • Deburring
  • Sand removal from as-cast parts
  • Mold lubricant removal
  • Rust removal
  • Radiusing
  • Spatter removal
  • Cleaning
  • Removal of sprinkled powder

and many more.

Deburring
Before
 
Before

Propose the best solutions for deburring based on
thickness and kind of burr depending of materials and forming.

Result and function

  • Reduction of assembly faults
  • Safety improvement
  • Drive unit protection
  • Prevention of chipping and cracking
  • Slipperiness improvement

Examples of processing

Deburring of automotive engine parts

Before

Before

After

After

Deburring of die-cast parts

Before

Before

After

After

Sand removal and descaling of engine block. (Shot blast machine)

Sand removal and descaling of engine block. (Shot blast machine)

Machines used for deburring and their features / Features of the process

Machines Features of the process
Wet battery polishing machines
  • Capable of processing products in batches.
  • Eliminates the necessity of degreasing even oily products in the previous process.
Dry barrel polishing machines
  • Eliminates the necessity of cleaning, rust prevention and drying.
  • No compound is required.
  • Makes the products less likely to rust.
  • Eliminates the necessity of waste water treatment by using no water.
  • Less likely to cause thin products from stacking.
  • Less likely to deform or distort products.
  • Makes the surfaces less likely to harden.
Precision brushing machines
  • Capable of deburring without removing sharp edges.
  • Less likely to incline burrs or cause secondary burrs.
  • Capable of deburring narrow slits without roughening the surface.
  • The on-piece process is less likely to cause gouging or chipping among products.
  • There is no risk of grit and shots clogging products or entangled by them.
Air blasting machines (sand blasting)
  • Capable of blasting a local point by injecting shots through a nozzle.
  • Capable of blasting the inside of a product.
  • Suitable shots can be selected according to the product type from a variety of options.
  • The one-piece or batch process can be selected according to the equipment type.
Shot blasting machines
  • Capable of injecting a lot of shots and, therefore, blasting large products or a large number of products over a large area at a time, resulting in a high efficiency.
  • The one-piece or batch process can be selected according to the equipment type.

Please consult us for surface treatment-related.

(81)52-582-9217 +81-52-581-6896

Reception hours: 9:00 to 12:00 and 13:00 to 17:00 on Monday through Friday
(excluding national and corporate holidays)

Please enter your question here.

Page Top