• Products
  • Industries
  • Customer Support
  • About SINTO
  • Investor Relations
  • Contact Us
  • Foundry
  • Surface Treatment
  • Environment
  • Mechatronics
  • Powder Treatment
  • Test & Measure
  • Ceramics
  • Material Handling

HOME > Products > Foundry > Product line-up > Sand Condition System > Sand Cooling System

Sand Cooling System

The system measures the temperature and moisture contents of recovered sand and adds cooling water to the sand in proportion to the measured values. During the agitating motion of sand in the rotary drum, the outside air is induced to the drum, and the sand is cooled by removing the vaporized moisture.

Sand recovery system Sand Properties control system Aerator

Water feeding device proportional to sand temperature and moisture - MIA-Ⅱseries

The collected sand is stabilized in temperature and moisture content to reduce casting defects.

Water feeding device proportional to sand temperature and moisture - MIA-Ⅱseries

Features

  • The use of stepless water pouring control supports a wider range of sand temperature and moisture content.
  • Prevents bridging due to excessive water pouring and reduces sticking sand.
  • The sand temperature and moisture content values are indicated in a graph on the liquid crystal display in real-time.

Specifications

Model MIAⅡ06 MIAⅡ07 MIAⅡ09 MIAⅡ10
Detector Installed belt width (mm) 600 750 900 1050
Sand sensor Limit switch based touch alarm
Moisture content measuring electrode

Electric resistor type (stainless steel)

Sand Cooler - RCT series

By combining the sand temperature/moisture proportional water pouring unit MIAII, the sand temperature and moisture content can be controlled within appropriate ranges.

Sand Cooler - RCT series

Features

  • Decreased vibration and noise and easier maintenance.
  • Foreign matter is continuously separated by the outlet screen.

Specifications

Model RCT-20 RCT-40 RCT-80 RCT-120 RCT-160
Sand Treatment Volume (ton/hr) 20 40 80 120 160

Sand Bin - Bin series

Sand is delivered in the order received to ease the sand management. An energy-saving design that rotates the table feeder.

Sand Bin - Bin seriesSand Bin - Bin series

Features

  • Sand is delivered on a FIFO basis to reserve the stopping time and stabilize the collected sand.
  • Does not vibrate or rock and can also be installed in a high location.
  • The use of rubber tire driving system, combined with a simple construction, makes the machine maintenance-free.
  • There is no risk of bridging, which is likely to occur with shorter hoppers.

Specifications

Model BIN20S BIN30S BIN40S BIN50S BIN60S BIN80S BIN100S
Method Shell fixed table feeder
Shell fixed table feeder(mm) Φ3050×4.5 Φ4850×6
Sand feeding table diameter(mm) Φ2700 Φ3700
Table liner diameter x thickness(mm) Φ2700×6 Φ3700×6

Please consult us for foundry-related inquiries.

(81)52-582-9217 +81-52-581-6896

Available hours: 9:00-12:00 and 13:00-17:00, Monday through Friday
(excluding national and corporate holidays)

Please enter your question here.

Page Top